Pump Factory Pty Ltd

Fully Automatic Submersible Drainage Pump with INTERNAL FLOAT

The floatswitch is intergrated into the body of the pump, allowing the pump to fit into a SMALL PIT 260mm x 170mm x 330mm (LxWxH) without fouling and dry running, which is  the main cause of most submersible pump failures and motor burn outs.

The pump also comes with a built-in manual mode which allows the user to switch to manual mode with the flick of a lever to allow the pump to operate down to a water depth of 5mm. This means you can empty 99% of the water inside the pit compared to leaving large amounts of water when using the traditional pumps. The impeller inside sits quite low meaning even in manual mode a depth of 5mm is achievable without dry running and motor burn out.

APPLICATIONS:

• Collecting rainwater from rain water tanks
• Portable use around the house after flooding
• Grey water, irrigation, gardening, water transfer
• Ideal for washing cars, boats and irrigation

FEATURES:

• Power Supply: 230 Volt / 50Hz / Single Phase
• Motor power: 550 watts
• FLOW: 11,000 litres per hour (max)
• HEAD: 8.5m (max)
• AIR BLEED VENT VALVE: Built-in prevents airlocks and keeps your pump primed all the time
• OPEN VOTEX IMPELLER allows soft solids upto 5mm passage for grey water
• Cable length: Extra long 10m
• Electrical plug: Australian approved 3 pin electrical plug (No wiring or electrician required- just plug it in)
• Outlet Size: Adjustable hose barb
• INTERNAL FLOATSWITCH: Built-in for automatic operation
• MANUAL MODE: Turn the pump to manual mode with a flick of a lever to allow pumping down to 5mm of water depth
• Revolution: 2950 rpm